Buy Betco Ax-It Plus No-Rinse Stripper Price, Features, Specs

Betco Ax-It Plus No-Rinse Stripper

Item#: BET154B500

Category: Floor/Carpet Cleaners & Protectors

Price: $154.19/Each

Qty:

Add Line Note

Add To Favorites

Quick Overview

Versatile - use in a range of dilution ratios depending on the job
Aggressive, fast-acting solution resolves stripping difficulties like excessive buildup
Saves time and effort with no rinsing
Use on hard-surface floors and all types of resilient flooring
Will not streak, puddle or fish eye

General Information
Manufacturer	Betco Corporation
Manufacturer Part Number	154B500
Manufacturer Website Address	http://www.betco.com
Brand	Betco
Product Line	Ax-It Plus
Product Name	Ax-It Plus No-Rinse Stripper
Marketing Information	This fast-acting floor finish liquefier will solve stripping difficulties caused by frequent high-speed burnishing, super-hard urethane fortified finishes or excessive buildup. It is designed to remove layers of floor finish in less time with less effort and no rinsing. Floors are ready to re-coat without neutralizing when used as directed. Use on hard-surface floors in a range of dilution ratios to do the job. Low-foaming formula is recommended for removing water-based acrylic floor finishes for all types of resilient tile and hard surfaces. Ax-it Plus is not recommended for stripping linoleum or sheet vinyl floors.
Packaged Quantity	1 Each
Product Type	Floor Stripper
Product Information
Cleaner Type	Concentrate
Cleaner Form	Liquid
Cleaner Volume	640 fl oz (20 quart)
Composition	Phosphate
pH	13.5 - 14
Directions/Instructions	Recommended ESIor removing water-based acrylic floor finishes from all types of resilient tile and hard surfaces. Pre-test in a small area; color bleeding or discoloration may occur on linoleum, rubber tile or asphalt tile. Not recommended for stripping linoleum or sheet vinyl floors. Sweep or dust mop the floor to remove any large debris. Dilute with warm to hot water. For normal stripping, dilute 13 oz./gal. or 100 mL/L (1:10) of water. For heavy stripping, dilute 25 oz./gal. or 200 mL/L (1:5) of water. Apply solution liberally to floor surface. Allow a minimum of 5 minutes contact time. Be sure to keep surface wet at all times. Agitate with a low-speed rotary machine, automatic scrubber or stripping machine. Pick up the solution with a wet vacuum, an automatic scrubber or a mop and bucket and thoroughly rinse the floor. Allow floor to dry completely before applying finish or sealer. No flood rinsing is necessary if surface appears free of dust and residue. Please recycle empty container.
Application/Usage	Hard Surface
Features	Residue-free
Physical Characteristics
Color Family	Dual Color
Product Color	Amber
Miscellaneous
Recycled	No
Assembly Required	No
Country of Origin	United States